98 Chrysler Cirrus

I recently had the ignition key on my Cirrus jam. I could put the key in but not turn it. This has happened to me twice before, but a good swift hit to the column seemed to unjam it. This time, no go.

Long story short, I used a dremel, and now have the Ignition keyhole/tumbler assembly out of the column. I was wondering if anyone knows where to get one of these to replace the one I distroyed. (oh, by the way, the key turns just fine now after I tossed it on the ground, finally un-stuck)

I've looked over a couple auto parts places online, but they either don't show a picture, or they show a key/switch assembly that appears generic that won't replace what I took out.

Thanks, Posi

Reply to
Positronic Cat
Loading thread data ...

I don't know if these are available aftermarket, it might be a dealer-only item. But here's where you want to forego the Internet approach and just get someone on the phone and find out.

--Geoff

Reply to
Geoff

Reply to
damnnickname

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.