oil filer location on a 3.2?

??? Can't see it from above or below. No ramps or lift available to help out on the search quite yet.

I *think* it's on the left side below the exhaust manifold but am not sure.

And how is the thing mounted. 'Straight in' from below or at a 90 degree side angle.

and thanks!

Reply to
chuck
Loading thread data ...

I'll assume you mean the 3.2L in the LH cars... You have to approach it from underneath the car. It is on the left (driver's side) of the car, forward of the front tire, "buried." If it's black, you'll need a light to see it :-). For best results, you'll need to either use a ramp or jack stands. Also, you'll need one of those "3 pronged" oil wrench (opens/closes with turns), a long extension, and a ratchet drive. This assumes that you don't have hands with a steel grip. The design is just right so that the filter barely fits through the opening through the framework. HTH

Reply to
Rich Arnold

Intrepid/Concorde, right?

Yep, toward the front of the engine.

At a side angle, somewhat less than 90 degrees.

It's way up in there. I know where the thing is, and if it's painted a dark color I still have to hunt for it visually.

I use a 'cap style' oil filter wrench -- it fits over the end of the filter and has a 3/8ths square ratchet drive hole in the center. I'm pretty sure a

6" extension will give you the reach you need. Watch for oil running on the k-frame when you get it loose.

--Geoff

Reply to
Geoff

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.