The drivers auto door lock stopped working. I checked the fuses and replaced the button but it still doesn't work. The actuator is good because it opens and closes when the passenger button is pressed. Any ideas?
Thanks.
You say you replaced the button does that mean you replaced the master switch? If so and it didnt fix it you can start by checking for continuity at pin 4 WT/DG wire from the switch at the drivers side to pin
15 (brown Connector) of the BCM. If this wire is good youGlenn Beasley Chrysler Tech
MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.