Hi
I am looking for rubber bump stops for my 1948 Morris 8 E. they go between the front leaf springs and the chassis.
Thanks Hans
Hi
I am looking for rubber bump stops for my 1948 Morris 8 E. they go between the front leaf springs and the chassis.
Thanks Hans
I seem to remember that Landrover bumpstops might work, presumably early models, they aswell, if i remember right also fit onto upright Fords....?
Jono
Landrover bump stops are readily available. Cost about £3 each. They're about 3" high, from memory, and locate onto the chassis with lugs on the side, bolting onto lugs on the chassis, either side of the chassis rail.
If you want some definite measurements to see if it's worth getting some, I can take a ruler to some spares I've got in the garage.
Alex
Indeed. I've found the Land Rover 'series' style bump stop rubbers to be invaluable as a 'universal' bump stop in several custom applications. At about 3 quid a time they come in very handy. LR and RR engine mounts are also very affordable and suitable for many applications.
Simon H
In message , Hans Berkhout penned
Try
Morris 8 spares Mr J Bates
23 mount street Breaston Derby England +441332 873207or
Vintage and collectors spares
snipped-for-privacy@btinternet.com
if you don't do any good with these I may be able to come up with a couple of other contacts when I have their information at hand.
MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.