Re: Part needed for a 1980 F-150

I believe you are talking about the inner stub shaft in a Ford IFS front

> suspension. It has a collar on it that holds it in with three bolts. > 1980 was the first year for IFS > > Right? > > Spdloader > > > > > > > > > If there are not three bolts holding it in, the why do i have to remove > > three bolts is the side of the front differential to remove the shaft from > > the front differential and passengers side axle?????????????? please Mr.. > > know it all tell me that i am getting a picture of it and the well see how > > looks dumb in the end > > > Again, as replied before. Try a ford dealer. AND there is no 3 bolts > > > holding it in. How many times do you have to ask about this phantom > > > problem? > > > > > > -- > > > Steve Barker > > > > > > ========= > > > > > > > > > > > > > > > > > > i have an 1980 f150 4x4 that the inner yoke in the front on the > passages > > > > side next to the front differential it has 3 bolts that hold it in the > > > > differential is striped out and would like to know if anyone has one > > that > > > > would sell or might know where i could get a new one at or a used one. > > > tried > > > > the local salvage yards with no luck. please e-mail me at > > snipped-for-privacy@cwv.net > > > > > > > > > > > > > > > > > > > >
Reply to
William & Peggy Riggs
Loading thread data ...

Thank you it was great to finally have some out there know what i am talking about, yeah that is the one. i need to find a yoke for it can you help???

Reply to
William & Peggy Riggs

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.