Help if you can....

That bubble on your dash is a sunload sensor. If you have EATC or automatic climate control then it will use that sensor to kick up the a/c if the sun is hot.

Those AUX switches are known as upfitter switches. They are tied into a relay box above the glove box on the pass. side of the dash. According to the wiring diagram in the EVTM there are 4 relays for 4 switches (2-30A and

You should be able to get a manual from Helm. They are expensive but from what I hear some of the best there are out there.

High voltage??? Well if you consider 13-14v high volts, whatever.. LOL If you have an electric window, it might have a capacitor, which can hold a few volts.

Ford Tech

no Idea what it is for. I was told it was for an alarm light that flashed when it was active. I was also told it had something to do with the daylight running lights. Then I was told it was for my auto sensing dimmer for my review mirror. What is the actual function of this mysterious bubble?

where the wires are located so I can find them to hook up accessories? I have some free wires under the hood by the drivers side that are solid colors and I have no Idea what they are for I thought they were the ones I needed but there was no power to them. There are so many other wires under the dash and where the manual said they were I could not find them. Any ball park figure would help.

This link should help you out. The bulletin states it is for 2005 SD, but my 2006 was wired identical.

am assuming that they are not out yet I have looked everywhere. I just wonder how long of a wait its going to be before they do hit the market.

I looked under the panel and there is a device saying warning high voltage. Is this the part I need to replace for that light to work again or is there an actual bulb under it?

JP, thanks for the link man. I totally forgot that they had that info on that site.. I guess they should revise the EVTM though, cause the locations a comepletely different from what that webpage shows.

Ford Tech

Re: your brake light, there is a peanut style bulb back there to be replaced.

Not a 914, but the larger one. I forget which one it is.

Spdloader

Thanks that helps a bit more.

Krusty Out

Once I get past the door trim on the back hatch there is two screws that hold a long electronic piece for the upper break light. Is that the cause or is there a bulb behind that?

Thanks

Any one know anything about this?

Ok I found out that there is a BALLAST for the "HIGH MOUNT BRAKE LAMP" for My 1996 Explorer. Would this be the cause of the High Mount Brake lamp not working or is there usually a Bulb in play behind it.

Thanks

Krusty Out

On Sun, 04 Feb 2007 22:14:28 -0600, Krusty rearranged some electrons to form:

Yeah, it's not just a light bulb, it's the driver for the LEDs. Someone I know had to get it replaced and it was in hundreds of $. I suggested that he get one from a junkyard.

Thanks I will give that a try.