I have a 2000 ranger 3.0 flex fuel truck it started to stall intermittently it will be running fine no missing or power loss and just quit. if the key is then shut off it will restart and then run fine for a couple days. after a stall it has no injector pulse. have cleaned and checked grounds and continuity from pcm problem seemed to go away but about 100 miles later it stalled again. had a similar problem a year and a half ago. was at that time giving a code for faulty crankshaft position sensor- replaced - not fixed replaced pcm was fine until 2 wks ago. Help please
- posted
16 years ago