is a new process 435 4 speed a good trans,it was on a v6 but will it go on a v8 that had a auto,and will it be good to do that or rebuild the od in the auto??
transmission
Oct 23, 2004
10 Replies
can some1 help me with this?????
On Sat, 23 Oct 2004 18:08:37 -0400, White Boy rearranged some electrons to form:
Perhaps if you learned to type intelligently, and provided detailed information as to what vehicle you are talking about, maybe someone would help you.
sure
stop typing in 'ebonics' and I'll be glad to
the trans came out of f150 that had a inline 6,i want to know if it will go to a 302
WAYYYY to much info......try being a lot more general.
That narrows it down to about 10 different models. Which transmission model? What year? In 1993 alone the F150 had 5 different trans. available (2 manual, 3 auto).
-D
It will bolt to the motor if it came off a 300cid in-line 6. They share the same bolt pattern for the bellhousing. Good luck with your clutch and throw out bearing and slave set up.
Yes the 435 is an excellent trans.There was a wide ratio and a "close" (4.56/1 low)model.They are very stout.The one in my '69 is still going strong in a heavy use situation.The 302 is nowhere near too much for that trans.
******************** There are three kinds of lies; lies,damned lies,and statistics.---Disraeli
It should bolt right up too.
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required