The ONLY thing in a 2000 TJ's front-end that can be aligned is the
>toe-in. Without using aftermarket parts, the caster and camber angles
>are fixed and not adjustable.
>
>The good news is you can easily and totally accurately set your own
>toe-in. I haven't paid to have my toe-in set in years since learning
>how to do my own. Set your own toe-in to 1/8" by using the easy
>instructions atformatting linkAll you need >is a tape measure, a wrench, and a big set of pliers. A friend to hold >one end of the tape measure while you measure is helpful. No worries, >done with a little care this technique will produce a toe-in setting >just as accurately as the high-school dropout at the local alignment >shop can produce. That webpage also shows how to center your own >steering wheel
Jerry How much play should you have in the bushing where the tie rod attaches to the back of the wheel?
Joe Carroll
2K-TJ
There are some simple truths...And the dogs know what they are." Joseph Duemer