Anybody have this problem before? I cannot turn off the wipers on my 97 Wrangler. I can switch between the hi and low settings but when the switch is set to off they just keep going. I can't decide if it's the motor or the control..
Glenn
Wipers always on
Sep 01, 2007
3 Replies
Motor for some reason lost the park stop. There is a spot in the lower travel that sends a ground back to the wiper controller.
Dunno exactly how your unit works but in my old C-10 there was a ground strap through one of the bolts. It was corroded and that prevented the park from working. I'd start with checking the motor connection.
Can you unhook the control from the motor? If it still happens when unhooked it's the motor
My guess would be the control as the motor is working if you have both speeds
Im not sure if its like the XJ and ZJ's but does it also have a separate control module? If it does it may be located on the knee plate just below and beside the steering wheel. Check out Ebay auction # 270170514831. If you have the same thing drop me line, I have 4 more left (not incl. the one up for auction).
Snow...
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required