LOL, most things fall part on a Landover, apart from the stuff you NEED to get off!
Nige
LOL, most things fall part on a Landover, apart from the stuff you NEED to get off!
Nige
I have discovered a unique Landrover part.
It's a telepathic bolt with a high-tensile steel core and a pot metal head.
Normally a bolt head would look something like
__ / \ / \ | | | | \ / \--/
If this magic bolt detects the intention in your mind to go near it with a spanner/socket/whatever it immediately becomes more like
O2 of the damn things so far needing "coaxed" out.
Coaxed with:
Penetrating Oil Heat Cold chisel Peen hammer Club hammer Sledge hammer Cordless Drill Corded Drill
and eventually welding a fecking bar to the head so I have some purchase.
One of these on the drive flange on the propshaft, the other on the flange on the half-shaft retainer.
I wonder how many of these damn things got into the process.
Although, I've discovered why the diff disintegrated.
I pull the drain plug out to drain the diff and there's a nice rushing sound as of air going *in* to the Diff - the thing had less oil in it than the US in 25 years time.
The halfshafts still had a little bit which they proceeded to pour down my shoes though.
P.
Paul S. Brown vaguely muttered something like ...
'seasy .. just walk away saying "I didn't really need that bolt to come out anyway" in as convincing a manner as you can.
Next time you start the LR up, the bolt will just drop out .. 'course, you'll have to then find where it dropped to, but that's a whole new tale .. ;)
Welcome to series landrover ownership!
Youre sure to find many more round bolts yet! I like to think of my angle grinder as a round spanner, as it usually undoes the round bolts. :)
Tom Woods wrote in news: snipped-for-privacy@4ax.com:
A man after my own heart!
Whatever did we do before angle grinders??
Derry
So Derry Argue was, like
Serious hacksaw, set of cold chisels, lump hammer, and forearms like Popeye.
How I LOVE my angle grinder!
Except of course that as soon as you get the grinder near it, it instantly becomes loose in its hole, and just spins as you attempt to grind it, usually managing to rip large lumps out of the disc as it does so!
Bet the new one falls out when you are'nt watching :-))
Any good with wheel clamps ???
MMMM Landrover oil in your shoes LOL.
Tip.. Wear wellies next time LOL ;)
MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.