Wide wheels....

Nov 06, 2004 6 Replies

Hi all,



I have finally had to bite the bullet and aquired a set of 35x10.5/16 Simex Centipedes. The problem now is finding some steel wheels to mount them on !



Does anyone know any good sources in the UK ?



Ideally I'm looking for white or grey 8 spokes or modulars with a minimum rim width of 8 inches (preferably 8.5). I know I can fit them on narrower rims if necessary, especially as I'll be running second air too, but a wider wheel should give a better seat and a better profile.



I'm trying to avoid the Matt Lee option on grounds of cost and "manufacturing tolerances". Having said that, if anyone has a second hand set at the right price it might be worth the effort to try and balance them.



These wheels and tyres will be the ones I use for the Outback Challenge so I'd like them to have a reasonable balance for the transport stages. Another reason for trying to avoid the Matt Lee "rattle".



cheers



Dave W.


On or around Sat, 6 Nov 2004 00:35:15 +0000 (UTC), Dave White enlightened us thusly:

Try Craddocks or someone - they mostly do 7x16 8-spokes for their budget tyre+wheel sets - I found they have more offset, so allow greater clearnace from the chassis components and/or more steering angle. Mind, I only had

31x10.5s on the 110, but they should be the same width.

I know they will physically fit on a 7 inch rim but they are, according to the importer, best suited to an 8.5 inch rim. The minimum rim size I've been advised to get is 8 inches.

Putting them on a 7 inch rim means that the sidewall angle is wrong which increases the chance of leaks and the chance of them being knocked off the rim. The second air kit would probably solve (or at least disguise) both of those so I will use 7 inch rims if that's all I can get. On the other hand if I can find someone to supply an 8 inch version that's even better !

I have had one useful lead on a set of 8 inch rims but nothing definite yet, problem is they are double the price of the 7 inch rims and have to be specially ordered.

cheers

Dave W. Yorkshire Off Road Club

Try Southam Tyres direct on 01926.813888 or Silverline 4x4 of Warwick ( speak to Chris Dawson )

Or wait till 13th Feb and chat to both of them at the Indoor 4x4 Show!!! ( Plug! )

David LLAMA 4x4

formatting link

I've already tried Silverline with no success but will give Southam a go on Monday...

I've got to have my Land Rover ready to ship in March so can't really afford to leave it that long although I have been told it's a good show :-)

cheers

Dave W.

formatting link

I'd also recommend Nene Valley. They went out of their way to help me with a more-than-slightly unusual problem a month or two back, and also volunteered discounts even though I clearly had nowhere else to go.

formatting link

On or around Sat, 6 Nov 2004 11:50:36 +0000 (UTC), Dave White enlightened us thusly:

saying that, they might've been 8x15 which mine were on. but I think they were 7", 'cos I remember being slightly surprised that the disco steel rims were 7", and were the same width.

the tyres were 10.5" wide, same as yours.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required