Corsa rear axle

Nov 19, 2005 6 Replies

Hi there



I've recently noticed the rear tyres on my corsa are both completely worn out on the inside and the outside of the tyres have good tread. Around 5000 miles from new and the insides are bald. I've been told that this could be the rear axle. If it's bent is this likely to spotted at its next MOT? What is the likely labour only charge for fitting one? =A3150?



Thanks to any replies.



David



F*ck worrying about the next MOT, you need to find out what is wrong NOW. Tyres wearing like yours are on the rear are never a good sign. Could be hiding something more serious.

I was relying on the theory that nothing goes without a warning ie- a few bangs first!!. Earlier on this year I had a wheel bearing melt and the rear wheel nearly came off. It could've been then that the damage was done but you wouldn't expect both rear tyres to show the same wear pattern.

Cheers

David

snipped-for-privacy@tiscali.co.uk wrote on 19 Nov 2005 15:27:09 -0800:

Or, say the inside of your tyres being completely bald!?!?

It's probably just an alignment issue. Although if its rear wheel drive thats not the case you have more serious issues to adress.

Ahhh, yes, you're a Merkin.

How about you f*ck off back to some Merkin newsgroups instead of spouting useless s**te in UK ones?

Get an MOT or alignment check done if you don't think you can diagnose the problem yourself. They've got a good chance of pointing out exactly where the problem lies if you talk to them about it first, that's how I sorted my soppy steering (worn inner trackrod ends on a Laguna, not outer as I thought).

I suspect that if you've had a wheel bearing 'melt' then the stub axle might have take damage as well, was that checked or replaced when the bearing died? Get the car up on axle stands and have a good look for anything loose or a disintegrating rubber suspension bush/subframe mount point in the rear end.

Chris

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required