hi all, my fan speed control only works on full speed.is there a controler somwhere that needs sorting out?
many thanks for info
adrian
hi all, my fan speed control only works on full speed.is there a controler somwhere that needs sorting out?
many thanks for info
adrian
Very common problem. Check out
Burnt out resistor pack, the modified new bit needs soldering in so unless you can do that yourself just leave it to the dealer, new resistor pack is about £15 IIRC, they will have done a few :-) Main reson they fail is due to the control layout meaning that most people never switch the fan off, just leave it on it's lowest setting for most of the time.
Main reson they fail is due
Errr...... You can't switch the fan off. The switch only takes it to it's slowest setting.
The fault is caused by a high resistance at the resistor pack connector causing the connector to heat up and melt. A replacement pack and modified loom is the fix. It is a plug in job.
TRH
Errr..... Oh yes you can!!! The off position is the white dot on the OTHER switch which controls the vents!!!
Obvious really :-)
Paul
-- snipped-for-privacy@theobviouscoventry-city.demon.co.uk Reply address is spamtrapped. Remove theobvious for valid e-mail address.
MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.