20 discussions on MotorsForum about the Chevrolet NV4500: what owners asked, what went wrong, and what fixed it.
A project is currently under way to facilitate the conversions of the CJ(and YJ, et al) to diesel power, utilizing various suitable retrofits. Ifyou have any interest in diesel conversions, you are invited to join ournon-commercial...
Project Jeep DeereRadiator questionQuit my job, been w/o DSL, using dialup.Time for new radiator on Mopar Injected 85 CJ-7Original needs to go.Any suggestions?BeCool or OEM (looks vs bulletproof)fancy braided hose vs OEM (looks vs...
The adjustable steering column in my wrangler is very loose; sloppy down in the pivot, the joint. I am worried that it may come apart some day when driving.I've had the steering wheel come off a car when driving (long, long ago when we...
Hello againI've been told by several people to consider changing the rear endgear on my 2wd '86 F150 when I do all the refurbish. It has the 4.9L6 cyl, but hoping to drop a free 351m400 in it at the same time!I will mostly be using the...
Howdy. I have a 2002 Dakota QC, 5.9L V8, 4x4 auto, and I hateautomatic transmissions. I'd really like to replace the auto with a5-speed manual. A transfer case with a mechanical floor shifter wouldbe nice, too.Options:1. Find an NV3500...
Okay, first things first: Don't kill me for asking:) Now... I want to do an axle conversion and need some advice on what to swap (Dana 30 frt/AMC 20 Rr, 11" drums). I've done a lot of searching and scrounging but can't find the right...