The suction function (assisted door locking function) stopped operating for the driver's door and truck. Any advice on what could be the cause for this failure and how to fix it? Thanks!
1999 S320 door and trunk suction
Aug 22, 2004
2 Replies
Try looking in the trunk fuse box. Look for the one that operates the door and trunk closures. It is probably #9. Pull it out for about 30 sec. Then put it back in. Try the door and trunk closures then. If that fixes it, you may have a leaky pump and you need to either repeat the fuse resetting or get it fixed. Good Luck!!!!
mcbrue helpfully under the bridge in the trailer down by the river
96 S420Pull out the fuse for the door lock and see if it reset the problem... if not, then check the vacuum hose by the pump to see if it is loose.
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required