300SD<82> DRIVERS WINDOW

well it works once again. the problem is the front part of the glass starts going up first though not enough to really see but if you gab the glass while it is going up and pull it forward it goes up with out a hitch

Reply to
pool man
Loading thread data ...

It is most likely that your window regulator is broken... the white slider thing... you can get a new one from MB dealer for $10... pretty easy to replace... take entire window motor out... drill out old one... put new one (but you have to use a big short bolt as a spacer so you don't break the plastic while peening the rivet over to attach it to window motor.

Have you took out and apart your switch to clean all 6 contacts inside the switch? It is a very common thing to oxidize so that it is choking power to the motor.

Reply to
Tiger

once i pried it down a bit it has been working fine speed wise in the up & down mode. till it gets 2/3s the way UP. it then bogs down and will then trip the over load so you then have to go down a bit in order to have it go back up.

i can live with it the way it is as it is no classic.

if i get a day to play i will take on the task of the gutting its innerds

the case, minus a few cans!

Reply to
pool man

Reply to
marlinspike

THIS weekend or next will be project time.

now have dash lights that REALLY WORK. i can now see how fast i am going along with every lit bulb.

paper clip jumping the dash dimmer. bright is good

the case, minus a few cans!

Reply to
pool man

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.