the 4g63 2.0

i have 2 2.0 motors i have one from a 97 galant and a 93 eclipse i was wondering if i could take the head on the 97 and put it on the 93 block i am also wanting to build the head up as much as i can without changing the cams for now theres not many peformance parts out there for the 97 2.0 i was wondering if i could order parts for the 93 head that will fit on the 97 head if so i found titanium dual valave springs and retainers i want but i dont know what else i need to change for these parts i know the valves need changed what kind would be good?? if theres any other parts that need to be changed let me know or if u know any websites that has peformance parts let me know them so i could give them a look

for a look at my car this is the link

formatting link

Reply to
scott
Loading thread data ...

formatting link

>
Reply to
scott

what are you looking to do with the car? the '93 head will be more suited for performance but the '97 head will work once the holes for the head bolts are reamed. your '93 head will rev to the top of your power band and beyond with no float so why mess with it? if you're looking to geek up your motor there are more cost effective methods. check out this stuff.

formatting link
formatting link
formatting link
formatting link
formatting link
formatting link
formatting link

formatting link

>
Reply to
simpleton

theres no reason for doing this i had the 2.0 for the galant in the car and i ate the timing belt bent all the valves witch caut the pistons and banged em up a lil bit i dont know if it fractured the pistons and i dont wanna chance it because the blocks are known for crank walk and id hate to put all new pistons in it and run into that problem

formatting link

>
Reply to
scott

Reply to
simpleton

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.