Latest threads in Ford Mustang Forumshow only best voted threads
| Subject | Author | Posted | Replies | |
|---|---|---|---|---|
|
|
Ford to lay off 15,000, GM saves 2700 jobs
The GM plant in Ontario will (instead of being closed) produce the new Camaro, saving approximately 2700 jobs though they will lose some of the total number now employed. Ford's 20% production...
3
|
17 years ago
|
3 | |
|
|
347 serious ? for serious stangers in the know
This groups been good to me. Good answers for good questions. Ive got a 69 351w that Ive done the top end on with edelbrock performer parts. Ive now got an 89 GT 5spd that im not intimate with engine...
4
|
17 years ago
|
4 | |
|
|
Fan relay
Can anyone tell me where the fan relay is located on a 1995 GT. My fan stays on all the time. I have to unhook my battery to keep it from draining due to the fan running constantly.
—
|
17 years ago
|
— | |
|
|
FINALLY Saw one! New Hertz Shelby GT500-H Pictures attached! (0/1)
Enjoy Group!
5
|
17 years ago
|
5 | |
|
|
What is a good 65 restoratation book?
I saw a ground up restoratation book for 65s at a bookstore years ago, but I cannot find it now. Any recomendations? Thanks, L.
1
|
17 years ago
|
1 | |
|
|
431 rwhp gain with Kenne Bell Blowzilla
Some impressive numbers in the 5.0&SF. They started with a 99 GT with a prepped short block & ported heads; baseline dyno run was 211hp / 248t at the wheels. With the K.B. Blowzilla at 20 psi they...
1
|
17 years ago
|
1 | |
|
|
2005+ V6 rebuilding?
One last question, promise :) As I stated, I keep my cars forever which is usually 200/300/400k miles. Currently have a 92 Caprice getting close to 400,000 miles and only engine work I did was new...
2
|
17 years ago
|
2 | |
|
|
67 Shelby GT Production
I'm currently working on a database containing all 67 GT350 and GT500 by their VIN with Fotos and all the information i can find. so my question is: Anyone out there who is so incredibly lucky to own...
1
|
17 years ago
|
1 | |
|
|
1969 Instrument voltage regulator
I have a 1969 ford mustang an the Instrument voltage reglator keeps burning out can anyone tell me why
2
|
17 years ago
|
2 | |
|
|
Mobile car repairs in Scotland?
Anyone know of a mobile car repair company in Ayrshire Scotland?
—
|
17 years ago
|
— | |
|
|
tires and wheels
I am wondering what sizes of tires and wheels people are using on their Mustangs for the rear? I have a 2002 GT Vert with the stock wheels, and Eibach Pro-Kit lowering springs. I am wondering if I get...
3
|
17 years ago
|
3 | |
|
|
Stator connection to ground?
I was helping getting a garaged 66 Mustang (with 289) running and discovered that the battery wasn't charging. While checking this out, I found the wire from from the stator on the Alternator to the...
2
|
17 years ago
|
2 | |
|
|
Thinking about building a 4V....
...to go into my 98 gt. I don't know much about engines so - besides the heads, block, and intake - what will I need to complete a 4V? I know that some parts will migrate from my existing 2V engine...
16
|
17 years ago
|
16 | |
|
|
As Promised::: My GT vs V6 Test drive ::::::
So I kept my appointment with the dealer today and tried the GT vs the V6, both were coupes BTW. The GT was moderatly equipped and sticker'd in at $30,000 give or take. The V6 had a Pony package,...
21
|
17 years ago
|
21 | |
|
|
Tailpipe options for 90 GT
Hi all. I'm researching tailpipe options for my 90 GT, and have discovered Flowmaster now makes one thats 3 inches diameter for my car. This interests me, but will I encounter any fit problems? I'm...
7
|
17 years ago
|
7 |