Hi,
I'll be surprised to get an answer since there is so little written on usenet about the "thermovalve". But I can hope.
I have a coolant leak from the O ring in the thermovalve in my 96 Sentra. The ThermoValve pushes out a shaft as the coolant warms up, and slowly turns down the idle by moving a springloaded cam that moves the throttle.
I can see one screw that apparently holds the TV to the throttle body, but there must be more involved than just that screw.
Looks like I'll have to remove the air intake tube, and whatever other hoses I can, to get some room.
What else do I need to do ? Just trying to get some info ahead of time to minimize trhe chances of messing something up when I actually replace the O ring.
Thanks