Peugeot 405 second build Clarion Radio

Radio appears to be ok but no sound. I've taken the radio out of the dash but no visible damage to cables. . Could be the speaker wiring loom.

Is this difficult to locate and fix for the interface to the various speakers. All the speakers are u/s. Any comments/suggestions gratefully received

ta

Reply to
Kevin
Loading thread data ...

No sound at all? If the display lights up and looks ok then the power is alright, and its unlikely all 4 speaker cables would go out but not the rest. I'd suspect the radio has died, as it'll be getting on a bit if its still the original...Have you tried another radio? Does the tape player give any sound?

If you still suspect the speakers then theres a pinout for the connector here that should help:

formatting link

-- Andy

Reply to
stealthf0x

Can you test the radio in another car or another radio in your car? Best place to get it fixed id

formatting link
You remove and pack the radio, they collect via courier, repair and return. Cost £60 last time I used them. Is this the system with the seprate JBL amplifier in the boot? Has that failed? Dave

Reply to
Dave Spam

Very useful diagram, but for some reason the left side of the left scheme doesn't show on my browser. Can you repeat? Thanks

Reply to
Wichita

It's just the way it's been scanned (its not my page), that should have all the info you need though. Were you wanting more specific details on something?

-- Andy

Reply to
stealthf0x

Many thanks for the reply. The radio lights up and scans various stations both from the radio itself and the remote stalk.

I have taken the radio out and had a quick look at the connectors. (I have not had the chance to put it back as it was a real b**** to take out -very difficult to extract the connectors from the radio as this is probably the first time they have been moved.

I will try a cassette in it - do not have another radio

No sign of any wiring problems but I'll do a continuity test on speaker cables.However the radio has 3 connectors and I have still to investigate if it is the same as your diagram.It's an estate but no reason why speaker and other connectors should be different ? .

By the way, why do Peugeot have the radio aerial cable so short.Its a real pain to put back

Will post any results in the next day or so

Kevin

Reply to
kevin

"> >

Thanks for the reply Could try and source another radio from a scrappie - if they have the code. I have access to another Peugeot 405 but it is a first build with probably different connectors and wiring.

The system is very basic - cassette and radio only. Never considered an upgrade.

Reply to
kevin

If it's the basic radio, then spending £60 on fixing it does not sound like a good idea. £100 gets quite a good radio these days. How much do scrapys charge for such radios these days? £5, £10 ??? Dave

Reply to
Dave Spam

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.