Brought my 9-5 (2000) in for an oil change. During a routine check they found the driver's side high beam was out. They say it isn't the bulb or the relay. Problem will require further investigation. Any ideas what it could be?
Rich
Brought my 9-5 (2000) in for an oil change. During a routine check they found the driver's side high beam was out. They say it isn't the bulb or the relay. Problem will require further investigation. Any ideas what it could be?
Rich
They're fused individually so that would be the first place to check, it's quite common for the bulb to blow and take the fuse with it!
Mark
Check the connection between the wiring harness and the headlight assembly. It is not an uncommon problem that corrosion occurs there. Simply disconnecting and reconnecting may cure the problem. If thiat works, disconnect and spray some contact cleaner on both halves and reconnect.
MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.