Going to a saturn dealer to get a key cut by the vin and code. I only got one key with the car and it looks pretty bad. I am going to install a keyless entry also so i won't have this problem.
Thanks for the Advice,
Tim
> > >
> > > > I have a 94 SL2 which was given to me by a relative.
> > > > It seems to be in good condition except for one problem.
> > > >
> > > > If I lock the doors the key won't work. Now inside the
> > > > car the lock works unlocks and locks all doors etc.
> > > >
> > > > Has anyone had this problem?
> > > >
> > > > Thanks In Advance,
> > > >
> > > > Tim
> > > >
> > > I'm guessing you have power locks. Because it works inside the switch on
> > the
> > > lock cylinder is bad or has fallen off. You will need to remove the door
> > > skin to get at it.
> > >
> > >
> >
> > I kinda figured that i would have to pull the door skin
> > or panel. The strange thing is the lock does not work
> > on the either the passenger or driver side and will not
> > turn the trunk at all? I was thinking bad cut key but the
> > driver and pass lock should not turn then the trunk will
> > not turn when inserted.
> >
> > Tim
> >
> Only the front drivers outside lock is electric. If it won't work in the
> passenger side or trunk then you have a key / lock cylinder problem. Was the
> ignition lock cylinder been replaced? If so it may not have been keyed to
> match the doors. Check to see if any of the keys you got with the car work
> in the doors.
>
>