Ya'll,
>
> The passenger seat on my wife's 99 SL2 is stuck full-forward.
Looking under
the seat I noticed that the rid that crosses underneath has come off (I
> assume that releases the catch on both rails when you move the bar in the
> front). Also found a small spring under the seat, must go over the rod.
>
> Anyway, figure the easiest way to put this all back together is to
> completely remove the seat. Looks like it's a torx head screw. Is that
> correct? Regular torx, not the secure torx?
>
> Thanks,
>
> Jim
If it's the same as my '96 SL2 they are indeed regular Torx. If you don't have the room to get a socket and ratchet on it I found that you can use a 8mm box ratchet designed for side battery terminals. Being a 6-point the flats were wide enough to go across the Torx points and allow the bolt to be turned out.
Ken