Daily digest from www.allindiasteelra.com for the week ended 10-12-2006

Steel prices remain flat on week ended 8-12-2006

+Hotlist By djain128, Section CURRENT STEEL RATES/PRICES Posted on Sun Dec 10, 2006 at 01:03:21 AM EST There was not much activity on the wholesale steel and iron market on Friday as prices continued to trade in a narrow range for want support and settled around previous levels.

Traders said adequate stocks position against lack of buying support mainly kept prices unchanged.

Following were Fridays's quotations per tonne:

CTD saria (kamdhenu) 8-mm, 28,300, 10-mm, 27,800, 12-mm 27,250, 16-20 mm 27,650 and 25-mm Rs 27,750. Rathi tor steel : 8-mm 27,500, 10-mm

27,000, 12-mm 26,300, 16-20 mm 26,900 and 25-32 mm 27,700. Saria Jai bharat (iso 9002) 8-mm 28,000, 10 mm 27,600 12-mm 26,700, 16 to 25 mm
27,400-27,500. Amba saria (iso-9002) 8-mm 27,200, 10-mm 26,800, 12-mm
26,200, 16-20-mm 26,600, 25-mm 26,700. Amba shakti: (TMT) 8mm 27,800,
10 mm 27,100, 12 mm 26,400, 16 to 25 mm 26,700-26,800.

M S Angle: (50x5) (50x6) 25,300, (25x3) (32x3) (40x3) 26,300, (40x5) (40x60) 25,400. Angle capital (ISI) (50X5) (50X6) 25,600, (40X5) (40x6)

25,700, (35X5) (65X6) 25,600-25,700.

Girder (joist) (150x75) 26,200 (175x85) 26,400 (200x100) 26,500 (125x70) 26,800. T-IRON (40X5) (40X6)(50X6) 25,800.

Ingot and Scrap: Mill heavy 16,500-16,700 Turning boring 15,250-15,350, Cast Iron 16,400-16,500, Motor parts 13,300-13,400, Rail re-rolling

15,200-15,300 and ingot Bhivari 21,500. >> [edit] Tata Steel raises prices
+Hotlist By djain128, Section CURRENT STEEL RATES/PRICES Posted on Sat Dec 09, 2006 at 08:33:15 PM EST NEW DELHI: Tata Steel on Friday increased the prices of its long products by Rs. 500 a tonne. >> [edit] Steel Prices as on 8-12-2006
+Hotlist By djain128, Section CURRENT STEEL RATES/PRICES Posted on Fri Dec 08, 2006 at 07:08:06 PM EST Saria MS TOR SIZE RATHI KANDHENU AMBA JAIBHARAT TMT AMBA SHAKTI
8 MM 27700 28902 27900 28000 28400
10 MM 27200 28452 27300 27600 27500
12 MM 26500 27852 26700 26700 26800
16-20MM 27100 28252 27200 27400 27200
25-32MM 27900 28352 27200 27500 -

MS ANGLE SIZE RATE

50X5 50X6 25300
40X5 40X6 25400
25X3 32X3 40X3 26300

CAPITAL ANGLE ISI SIZE RATE

50X5 50X6 25500
40X5 40X6 25600
35X5 65X6 26500

GIRDER/JOIST SIZE RATE

150X75 26200
175X85 26500
200X100 27000
127X70 26500

T IRON SIZE RATE

40X5, 40X6.50X6 25800

CHANNEL SIZE RATE

70X5 100X50 26000

FLAT SIZE RATE

40X5, 40X6 24700
50X5, 50X6 24700
20X5, 20X4 23700

INGOT SIZE RATE BHIWARI 21900 GHAZIABAD 21900 MUZZAFAR NAGAR 21600 KOLKATA 19300 GOBINDGARH 22500

SPONGE IRON SIZE RATE RAIPUR 13700 PATNA 13800 KOLKATA 13500

Comments >> [edit]