Automotive Technologies

15186 Threads Posts
to

Opinions on Equus electric oil pressure gauge

Anyone know if this gauge is reliable? It is the Equus oil pressure gauge (electrical) which is not available at Walmar...
2 comments posted 20yrs
posted by lpdcunha
2 comments posted 20yrs posted by lpdcunha

Automotive Electrical Problem

Hello everybody, I'm a pretty smart guy when it comes to electronics, which can make me very dangerous. I have a proble...
21 comments posted 20yrs
posted by scott.bauer
21 comments posted 20yrs posted by scott.bauer

2006 honda civic dx am/fm/cd player?

I hope this is the right group to post to! I'm a total newbie here... I just bought a bottom of the line 2006 Honda Civ...
0 comments posted 20yrs
posted by shopper
0 comments posted 20yrs posted by shopper

Re: 50 + PSI on oil Gauge

>"No body" wrote in >news: snipped-for-privacy@comcast.com: > >> Ok. I check it out again today and this time it topped...
0 comments posted 20yrs
posted by don
0 comments posted 20yrs posted by don

Proportioning valve?

All right, I give up on the brakes on my '55 Stude. They are as perfect as perfect can be mechanically, but I still hav...
3 comments posted 20yrs
posted by njnagel
3 comments posted 20yrs posted by njnagel

Reversing onto ramps?/

I need to do some exaust work and want to know is it ok to back my car up onto ramps so i can get more clearance to work...
3 comments posted 20yrs
posted by onthost
3 comments posted 20yrs posted by onthost

Remove Steering wheel on Pontiac 6000

I am using a puller to remove the steering wheel and even with that it doesn't want to come off, I have sprayed Penetra...
0 comments posted 20yrs
posted by theblottobox
0 comments posted 20yrs posted by theblottobox

sidewall tire cut

Hello, I have a sidewall tire cut about 2 inches but the tire is fine with no loss of pressure. Should I be concerned. S...
2 comments posted 20yrs
posted by Cowboys#1
2 comments posted 20yrs posted by Cowboys#1

Snap Ring Pliers

I just broke the tip off my Harbor Freight snap ring pliers. I see prices on Amazon from $5 to $75 Any advice on a new s...
2 comments posted 20yrs
posted by holotc
2 comments posted 20yrs posted by holotc

1990 F150 Ford Pickup Auto trans. won't run

wouldn't crank, changed the fuel filter, cranked, and ran sitting still, then turned it off and won't crank again. spar...
0 comments posted 20yrs
posted by joanne
0 comments posted 20yrs posted by joanne

Camshaft Position Sensor code -- 98 Lumina

Sorry for cross-posting, not sure the best place to post this type of repair question. Sorry for such a long post, just...
4 comments posted 20yrs
posted by andrew.sasak
4 comments posted 20yrs posted by andrew.sasak

new rotary engine trouble ?

Hi, i see tv ads for the mazda RX8 with the rotary engine. have mazda solved all the previous problems with this engine...
134 comments posted 20yrs
posted by blue.star77
134 comments posted 20yrs posted by blue.star77