Automotive Technologies

  1. Home
  2. Automotive Technologies
15187 Threads Posts
to

Worth reading in Automotive Technologies

Geo Metro AC clutch slips on engage

1996 Geo Metro 1.0 AC clutch slips on engage for just an instant and than works and cools fine. Seemed to get worse aft...
0 comments posted 23yrs
posted by johnd
0 comments posted 23yrs posted by johnd

What type of tool is this?

I was about to take the caliper off my Nissan Quest, then noticed I dont have the tool to take off the bolts. They look...
16 comments posted 23yrs
posted by odiegoogle
16 comments posted 23yrs posted by odiegoogle

High Oil Consumption

I recently bought a second hand Toyota Corolla 91 (80000 miles). I have noticed a high consumption of oil in the engine...
2 comments posted 23yrs
posted by Iam4B
2 comments posted 23yrs posted by Iam4B

Re: No ported vacuum on Holley carb

|I'm having a problem with a carb I bought used and rebuilt. (Yes, I |used a Holley rebuild kit.) It's a Holley 4160 (7...
2 comments posted 23yrs
posted by NOSPAMrex
2 comments posted 23yrs posted by NOSPAMrex

Re: Canadian Tire brake parts

> Hi all > > I'm going to do my front brakes (pads/disks) on my 2000 Windstar this > weekend. There are really only 2 c...
2 comments posted 23yrs
posted by sbigelowPOV
2 comments posted 23yrs posted by sbigelowPOV

Freeing Stuck A/C Spring Lock Connection?

There's always one.. of all the spring lock connectors I took off on my 94 Crown Vic to flush the system, there is one...
0 comments posted 23yrs
posted by JFB_821
0 comments posted 23yrs posted by JFB_821

Petrol in Diesel Engine

Can I expect any bad effects from adding (accidentally) approx 10% (6 litres in 60) unleaded petrol to a diesel engine...
2 comments posted 23yrs
posted by martinclayden
2 comments posted 23yrs posted by martinclayden

Delo 400 15w40 in a gas engine?

Since Delo 400 15w40 is rather inexpensive, I'm thinking of picking up a case. Mainly it will be used in my XR400 motor...
4 comments posted 23yrs
posted by Kev_inbox2
4 comments posted 23yrs posted by Kev_inbox2

what is mkp (torque) in ft-lbs?

What is the conversion between mkp (metric torque) and ft-lbs? -- CB
1 comments posted 23yrs
posted by cgbusch
1 comments posted 23yrs posted by cgbusch

Is this a "no brainer"?

I have an 89 Cutlass Supreme 2.8L MPFI I have been running slightly RICH for months now...not enough to cause black smo...
2 comments posted 23yrs
posted by mrbrnz
2 comments posted 23yrs posted by mrbrnz

Driving on low oil

I have a question about the effects of driving on low oil. I recently aquired a 92 Crown Vic from a familiy member. The...
6 comments posted 23yrs
posted by ryan
6 comments posted 23yrs posted by ryan

How to remove TrailBlazer door panel

Hi, I need to remove the door panel on an '03 Chevy Trailblazer, but there are no visible fasteners. Are these mounted w...
1 comments posted 23yrs
posted by jts
1 comments posted 23yrs posted by jts

Overheating problem - looking for suggestion

guys, I posted this problem on this news group a while back. Now I have additional information but I have yet to find a...
2 comments posted 23yrs
posted by pierre.sheehy
2 comments posted 23yrs posted by pierre.sheehy

Welding exhaust pipes

I bought a Port-a-torch from Sears and have used it to cut a few exhaust pipes. Now I want to use it for welding. What...
0 comments posted 23yrs
posted by fabyazi
0 comments posted 23yrs posted by fabyazi

94 CAMERO Z28 WRECKED LOOK

http://community.webtv.net/ken481/TANDEMBIKEBUILDERS http://community.webtv.net/ken481/PAINTBODYMASTERTECH
0 comments posted 23yrs
posted by ken481
0 comments posted 23yrs posted by ken481