1989 Toyota Camry 4 cylinder transmission oil volume
Mar 21, 2009 3 Replies
J
jgrock2020
hi all ,would like to know how many litres of transmission oil needed for a service on a 4 cylinder 1989 camry,the auto shops manuals mention
5.6 to the power of 12 ,what does that mean ? 5.6litres or what ,the workers behind the service desk have no clue!
Didn't find your answer? Ask the community — no account required.
R
ransley
Dry new fill to just draining and filling, as alot of oil stays in the trans, mine takes maybe 5-6 on a drain. Check hot and running and dont overfill as most shops do.
M
mrdarrett
5.6 to the power of 12, that's a big number, you sure that wasn't a footnote 1 or 2 or something?
What does the Haynes manual for the '89 Camry say?
As Ransley said, if 2 numbers are given, the bigger one is likely for if it's filling a new car with new fluid, and the smaller # is for drain and fill.
If doing a drain and fill, eyeball approx. how much fluid comes out, and use that as a starting point for refilling. I get about 2.5 qts of trans fluid out of my '96 4-banger.
Don't forget the differential, if it's separate from the trans fluid
Have fun
Michael
J
jgrock2020
thanks for your help the both of you ,cheers
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required
Report Content
You are reporting this content to the moderators. They will look at it
ASAP.