Emergency flasher works, signals work, but not the green indicator. Oil & Gen light not working. Checked bulbs, they're OK. The flasher relay clicks. No instrument lights working. I tried to trace all the wiring, it seems OK but am I missing something.
Warning Light not working?
Sep 21, 2003
4 Replies
First reply
e On Sun, 21 Sep 2003 18:34:27 -0400, "Mel P." ...are you getting 12 volts at the gauge? I bet that you are no0t...the wire from the indicator lights to fuse block is prolly disconnected. Gareth
Read the full reply
...are you getting 12 volts at the gauge? I bet that you are no0t...the wire from the indicator lights to fuse block is prolly disconnected.
Gareth
Track down the wires with a voltmeter measuring at any connection until you get to the hot wire from the battery, you should find the cause quickly, probably something like a connector-that-looks-like-connected-but-is-not, or a rusty connection, blown fuse, etc... Did you check the bulbs?
good luck Ant
Mel P. wrote:
i Had the same problem its most likely to be the fuse!
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required