I have a 94 850 non-turbo. I'm getting the following codes and need help interpreting them:
A6 Ignition: 1-1-1 1-2-2 and 2-3-1 (I thought 1-1-1 meant OK, but then the other 2 codes came up) B2 Cruise Control: 1-2-2
Any help would be appreciated.
Thanks,
Chuck
"caaron" skrev i en meddelelse news:WdqdnW6Yl7sWOfLenZ2dnUVZ snipped-for-privacy@comcast.com...
Asuming you have a Fenix 5.2 controlled engine:
A6 1-2-2 : Faulty air temp. signal A6 2-3-1: long term fuel fuel trim part load, lower limit. Possible source:
-High fuel pressure.
-Leaking injector.
-Dirty engine oil.
-Oil level too high.
-Leaking EVAP valve.
-Faulty sensor signals.
The B2 1-2-2 is normal if vehicle speed has not exceeded 35 km/h after ignition has been switched on.
Regards
Per Hauge
Thanks, Per. Very helpful.
Chuck
Have something to add? Share your thoughts — no account required.
Ask the community — no account required