To All,
while trying to replace the fuel filter on my 89 Volvo 240 DL Wagon, I kinked the fuel pump metal hose that goes into the fuel filter. The bolts going into the filter were practically welded shut. Nonetheless, I aborted the project and hoped the car would start - it did not.
Can this metal hose be straightened out? Do I have to buy a new fuel pump? Or can this component be purchased separately?
I look forward to your replies.
Regards
Mike Fargo, ND
On my 83' the copper washers were really torqued on. Its best to use good quality correct size wrenches and not an adjustable wrench, since a little play can lead to rounded edges. If the part didn't come with the filter, you could find another at a wrecking yard for next to nothing. In working on my filter or fuel pump I get some extra copper washers in case I have to reattach the filter or fuel pump. The washers get embosed with the fittings and may not form a possitive seal and then leak gas. Or, really wrench the part on and worry about how hard it is to remove next time.
Have something to add? Share your thoughts — no account required.
Ask the community — no account required