The bulbs behind the LED display went last night, or rather, the second one did.
How do you replace these or is this a case of removing the dashboard?
Replacing dash bulbs in 1994 850
Dec 14, 2004
2 Replies
If you are handy follow this
1: Remove the side vent , the vent on the drivers side & the 2 center vents 2: Remove the Torx screws 5 all together 3: Gently pull the upper dash pad up & away from you about 3-4 inches to remove the cluster 4: Unclip the cluster then disconnect the connectors @ the top of the cluster. If you have a trip computer there will be one more connector @ the bottom of the cluster 5: there a total of 6 or 8 bulbs depending trip computer or no trip computer. Change all of the large push in bulbs make sure that you get the 5 Watt bulbs not the 3 Watt bulbs 6: Installation is the opposite of removing the clusterGlenn
Go take a look at Bay13...
formatting link
or just navigate from
formatting link
I've followed this and it worked perfect.
Good luck,
Scott
Glenn Klein wrote in news:cJJvd.634$ snipped-for-privacy@fe08.lga:
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required