Does anyone know of any links which describe in detail how to replace the window crank assembly (non-electric) for a 1977 245? I've checked the Haynes manual, but can't find any detailed instructions.
Thanks.
-M
It's not too hard, just take the door panel off, remove the clips that hold the assembly to the bottom of the window, then undo the 4 bolts that hold it to the door (they're all near the crank, you can see where they are from you're replacement one.) It helps to have a helper to hold the window up, and you may need to adjust the position of the assembly with the crank to get it out of the hole in the door. After you reinstall the new one, do the final adjustment in the slotted holes with the window fully up.
MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.