1. Home
  2. Volvo automobiles
  3. S70 door unlock/window switches

S70 door unlock/window switches

I have a 1998 S70, and I have a question about the door switch and unlock switch. I was a dufus and separated the buttons from the underlying switches. If you see the picture at

formatting link
, you can see whatI'm talking about. I can put the two pieces together, but I believe thatI'm missing some pieces. Does anyone know what I'm missing that keeps the switches in position? By that I mean some sort of spring that makes the button return to its original position. At the top of the picture you can see a spring that I found, but I'm not sure if I should have other springs, and I don't know how they're oriented.

Any help would be appreciated.

Mike

Reply to
Michael Chiu
Loading thread data ...

That spring goes vertically into a hole (not visible in the picture, but very near the upper LED) in the upper end of the left piece in your picture. When installed correctly, you'll only see the shiny end which rides on the upper part of the white plastic piece which moves with the lock/unlock rocker. Taping the lock switch into the neutral position on the upper side may help during reassembly. Make sure the pin of the in the middle of the right half ends up in the hole of the small white piece of plastic.

On the driver's side you have 2 of those springs and 4 pins to mate into

4 holes. (It's not as hard to reassemble as it appears it may be from my description.)
Reply to
Mike F

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.