1. Home
  2. Volvo automobiles
  3. V40 windscreen washer nozzles

V40 windscreen washer nozzles

Greetings a.a.v

This might appear an over-cautious attitude on my part but I thought it better to ask, just in case ....

The rear windscreen washer nozzle on my 1998 V40 is well and truly blocked. Poking with a pin simply pushes the blockage back a bit, and it returns, as they so often do. I will need to remove the nozzle for a proper cleaning, but before I do, does any one know of any problems removing the thing? Any delicate projections that snap easily, etc?

Any advice or experiences gratefully received.

Cheers

Reply to
Roger Hunt
Loading thread data ...

I am not familiar with the design but can't you just remove the hose and blow it out from the nozzle end with an air hose? Then run the washer for a moment with the hose detached to flush out any debris that may linger in the hose.

Allen

Reply to
Allen

In article , Allen writes

I'll go easy. Neither am I familiar with the design and don't know how much slack Volvo have allowed, for the pulling out of stuff.

Reply to
Roger Hunt

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.