Seems my front-passenger window motor is dead. No response from both the driver's window switch nor the passenger's switch. All other windows work. No indication that the window motors are individually fused.
Do I need special tools to remove the door panel?
Is the motor integrated with the linkage, or can it be removed while keeping the linkage in place?
Not individually fused, but before you remove it, while the engine is running and the door open, slam the door a few times as you are holding the window switch in the door position, most of the times what happens is the window gets stuck in the gasket at the top, when the window does go down, clean the top of the gasket and the windows on all 4 doors.
don't be afraid to slam the door very hard either
Glenn Beasley Chrysler Tech
What do you use to clean the gasket? thanks sharkman
Any kind of house hold cleaner including windex
Thanks, I'll try that.. I hope it will eliminate the sticking problem..
Have something to add? Share your thoughts — no account required.
Ask the community — no account required