How does one tighten the rearview mirror on a 97 Explorer Eddie Bauer w/autolamp mirror. The mount on the glass where the mirror attaches to is solid and is not the problem. The problem is that the mirror is not tight on this mount. There doesn't appear to be any set screw. Do you need a special tool to install or remove the mirror from it's base?
Thanks Jay
'98 Removal Instructions:
CAUTION: Do not use tools or other objects to pry the mount or mirror away from the windshield. Use of tools may damage the mirror mount.
- Twist the mirror horizontally until the tube assembly bottoms out and the spring releases off the mounting button.
Good luck,
Steven
Xx wrote:
Have something to add? Share your thoughts — no account required.
Ask the community — no account required