1. Home
  2. Ford Explorer Forum
  3. Resetting, Shutting off the theft alarm for 95 Exp Eddie Bauer

Resetting, Shutting off the theft alarm for 95 Exp Eddie Bauer

Lost all the keys to the car and had to buy a new ignition switch. In trying to remove the old key switch I had to drill out the keeper pin and then broke the back of the cylinder,meaning I had to remove the little gear in the back that drives the antilock. I had to use a screw driver to get the gear aligned and tested for position for the new key. The alarm didn't go off until the second reinstallation of the ignition. After I mess around a while, I can not shut it off. I don't have a door key yet. Is there any way of shutting the alarm off? Thanks

Reply to
ogyver
Loading thread data ...

Update for those interested Drilled a 1" hole, 6" forward of the driver's side rear interior cowling opening that covers the rear window washer reservior in order to see the RAP module(silver box 6"x6"). It had a 6 digit number on it that wasn't visible enough from looking in the opening. That is the door key code, which we never had BTW. So hooked up battery ,alarms went off, punched in code- doors open and alarm goes off. Happy Happy. Read that some later years didn't have the code on the rap box.

Reply to
ogyver

Reply to
Eddie Collins

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.