does anyone have programming codes for 2004 Focus? I want to be able to lock
the doors with remote while engine is running.
I used to be able to do this on 2001 Taurus but on this one it does not
work. Here in Canada on very cold days it is handy if you can leave key in
ignition and lock the doors with remote you separated from the key. Not
recommended on suspicious streets, but handy at home. Only code I found was
to disable Beltminder annoying chime (first thing I did).
very slow to warm up - idling at -20 for 15 minutes, lukewarm air from
blower, engine temp on min.
Is this normal?
Signal ticker BLOODY LOUD!! Any way around this stupid thing?
Check out this link, under miscellaneous, first you have to use the Interior
Hack for removing the glove box. You need to buy a few things and know how
to solder wires, but it sounds like a good hack.
I concur, Your Thermostat, although new, may be stuck.
The Focus series does not use relays to actuate the indicators, so in
reality, it never would make any noise. So FORD added an electronic Piezo
noise maker which would go off in sync with the indicators so drivers could
A piece of tape over the Piezo Speaker holes should work fine.
2003 ZX5 2.0L 23.3k miles
"Those who forget history are condemned to repeat it" - George Santyana
Motorsforum.com is a website by car enthusiasts for car enthusiasts. It is not affiliated with any of the car or spare part manufacturers or car dealers discussed here.
All logos and trade names are the property of their respective owners.