I have a 2000 Ford Excursion. In older vehicles, doors had a plunger switch to sense an open door. I cannot find any switch on the door or frame. Where is the switch/sensor for an open door; can it be bypassed or can the "door open" alarm be turned off?
Thanks, Norris
It's built into the latch.
I also had this problem with my 2000 F-150 try spraying WD40 into the latch on the door then opening and closing the door ten times. Repeat the process
I'm new to the group and was just reading some posts.I have the same problem with my doors on my 98 Ranger. Thanks for the tip Justin I'm going to give it a try.
Have something to add? Share your thoughts — no account required.
Ask the community — no account required