Remove the combination coolant recovery/fluid reservoir and take out the insert at the bottom of the washer side. It has a retaining ring about the size of a half-dollar that must be removed with a pair of fine tipped needle nose pliers( it will bend a little but should be okay.) Check the connection for cracks in the boot - clean the screen and reassemble. Use a small tipped screwdriver to push all the reatiner heads into place. Either that - or quit hitting the switch when ya take off! LOL!
Jim
Here's another odd thing. 1990 Bronco, taking off from a dead
> stop the windshield washer squirts out a little on the drivers side.
> This isn't the kind of things that makes me freak out, but it's dam odd. >
>