03 tj front driveshaqft boot.

Sep 08, 2003 3 Replies
03 tj sport, 4.0L

there is a rubber boot that goes between the 2 pieces of the front driveshaft. I tore mine off getting stuck on some logs.



Anyplace I can get one, besides the dealer? Also, what kind of grease do I pack in there?



thanks, matt


They are not that much at the dealer. Make sure you get the front one, not the rear one. Parts guys sometimes can't read.

Bad news is you have to take the driveshaft off the front piniom to replace it but it isn't too difficult. Just use some standard multipurpose grease. Would be a good idea to clean the splines as well.

  • * * Matt Macchiarolo
    formatting link
    formatting link
    formatting link

Match-mark it so it goes back with the same orientation... keeps what balance you have. __ Steve .

Whoops, forgot that point, thanks Steve.

  • * * Matt Macchiarolo
    formatting link
    formatting link
    formatting link

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required