Hi Folks: I first started this topic in Sep. 2003. I've only today, Dec. 29,
2006 gotten to this because it failed inspection for the pointer not lining up. For the benefit of anyone trying to align their shifter, I'm going to post some pictures on my website
formatting link
. The plastic collar that ison the top-side of the metal braket has a 'drawer' that slides out.There is a little slot that a flat-blade screw driver can be insertedand used to slide open the 'drawer'. This squeezes the other plasticshaft that holds the cable. You might be able to do this through theopened end on the metal bracket, as it aligns with this. I had to pullthe bolts holding the metal bracket and pull it down (not much room) tosee this. I hope this helps anyone trying to fix this. There were noreplies to my old posting.Harry