Noslip help needed

I've got a 93 yj w/ d35c open carrier. I bought a Noslip from a guy with a

93 cherokee, d35c open carrier. I just can't get the last two peices to fit at all. Not even close. Does anyone know if there is a diff. with these two axle's? The part #'s are the same but I can't get in the right side drive and the pin. Nick
Reply to
Nick N
Loading thread data ...

Reply to
L.W.(ßill)

formatting link

Reply to
L.W.(ßill)

Reply to
L.W.(ßill)

Gosh, Bill, I am a little surprised that you haven't asked him for the pictures of his soon-to-be-broken d35 axles for your collection. It is a pretty nice collage.

Jerry

Reply to
Jerry Newton

Yup, that's pretty much it. Got the whole left side in, got the right side gear in but no way in hell is the drive and then pin gonna fit in. Nick

Reply to
Nick N

Reply to
L.W.(ßill)

formatting link
there's a 22a that I missed that tells me to take a big ass hammerand pound the shit out of it to get it in, it aint goin it. It says it'sfor my axle but??? Nick

Reply to
Nick N

Reply to
L.W.(ßill)

ok, these are different from my the manual that came with it. now that i look much closer... argh! Bill, a 44 is out of question right now. What do you see out of order, please just tell me so I may be able to fiqure this out. Nick

Reply to
Nick N

Reply to
L.W.(ßill)

Ok, the (my) manual says to install just the left side coupler first (not both sides). Then put the spacer on the coupler and slip in the c-clip through the slot on the spacer. then slip on the driver. then do the right side....not both couplers, than the spacer and driver all at once. I still don't see where the space will be made up... Nick

Reply to
Nick N

Reply to
L.W.(ßill)

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.