Jeep and Willys (new and old)

FS. locked 20 and 30

If anyone is interested, I will be selling my rear AMC 20 wide track, Yukon cromoly axles, 4.10s and detroit locker, sa...

7 comments posted 17yrs

posted by greglc84

7 comments posted 17yrs posted by greglc84

Got a new Cherokee

So my wife was without a Jeep for a year and she wanted another. The Olds just didn't cut it getting back into the camp...

19 comments posted 17yrs

posted by romainm

19 comments posted 17yrs posted by romainm

Towing w/ Grand Cherokee SRT8

Hi all, I'm looking at buying an SRT8, but I need to tow from time to time and I'm troubled by its relatively low (3500...

5 comments posted 17yrs

posted by spam_box

5 comments posted 17yrs posted by spam_box

brake bleed procedure

Hi All, Is there an 'official' brake bleed procedure for a CJ ? (including using that brake tool etc ?) I saw there was...

0 comments posted 17yrs

posted by ron.croonenberg

0 comments posted 17yrs posted by ron.croonenberg

upper radiator-hose belt interference

Hi all, After I put the onboard air in (york) I promissed myself I would take care of that almost belt-radiator hose pr...

3 comments posted 17yrs

posted by ron.croonenberg

3 comments posted 17yrs posted by ron.croonenberg

Time to replace alternator or wiring problem?

I was driving on the highway and the battery light came on. Then I was sitting in traffic and the Jeep just stalled. I...

7 comments posted 17yrs

posted by mpernice95

7 comments posted 17yrs posted by mpernice95

proportioning valve

I replaced all brake lines on my CJ how does one bleed the proportioning valve ('79 CJ5)? (it pretty much drained when I...

6 comments posted 17yrs

posted by ron.croonenberg

6 comments posted 17yrs posted by ron.croonenberg

Rear suspension sag

My 1990 Jeep Cherokee has a bad case of saggy springs. The leaf springs are old and shot. I'd like to replace them, but...

6 comments posted 17yrs

posted by polaskinator

6 comments posted 17yrs posted by polaskinator

putting a 4.0L engine in a Wrangler with previous 2.5L

Is it possible to do an engine swap 2.5L for a 4.0L? I have a 97 TJ 2.5L that needs a new motor. I would like to put a 4...

3 comments posted 17yrs

posted by bspear78

3 comments posted 17yrs posted by bspear78

97 Wrangler 2.5L low oil pressure

I have a 97 Jeep Wrangler 2.5L that is showing oil pressure reading of around 40 psi at 2500 to 3000 rpm and around 2-5...

8 comments posted 17yrs

posted by bspear78

8 comments posted 17yrs posted by bspear78

Restored Antique RV 1920 Dorris model K-4 I found it rusting in a barn in Montana.

Restored Antique RV 1920 Dorris model K-4 I found it rusting in a barn in Montana. After 4 years and lots of work, my l...

0 comments posted 17yrs

posted by steven_johnson

0 comments posted 17yrs posted by steven_johnson

Passenger seat frame

I'm restoring a '57 CJ5 and I'm looking for an original "fold and tumble" style frame for the front passenger seat. Any...

1 comments posted 17yrs

posted by lcrider

1 comments posted 17yrs posted by lcrider

Liftgate wiper 96 XJ

I think my rear liftgate wiper motor is probably going bad, but before I spring for a new one I'd appreciate any input...

2 comments posted 17yrs

posted by mick

2 comments posted 17yrs posted by mick

Cam Sensor Screeching When Cold

I have a 4.0L 2006 Jeep wrangler. Just recently, there is a terrible screeching noise that I traced with a stethoscope...

4 comments posted 17yrs

posted by Christopher.Maness

4 comments posted 17yrs posted by Christopher.Maness

258 ignition timing

Hello, I think I need to do something about the ignition timing in my Jeep. One of the things it does is; it 'diesels'...

11 comments posted 17yrs

posted by ron.croonenberg

11 comments posted 17yrs posted by ron.croonenberg