12V dashboard plug

Any chance of a picture ?

Steve

Greg uttered summat worrerz funny about:

Maplin do em. The oginional ones cost a Kings ransom last time I looked. I've a set wired to a ciggy lighter socket.

Lee D

LR used to put one in the tool kit. Part number 560617.

It was a pretty nasty thing - there may be better ways of doing it.

Provided they're 4mm Banana Plugs, Maplin do them for pennies.

Alex

Maplin appear to do the same ·%$&($( stupid thing that RS do, and the links you have provided don´t work, except for you kind of thing. Stupid stupid idea.

Steve

Umm. The links work fine for me.

Thanks for the warning, but following the rewire there's nothing but the starter motor unfused on mine, I added a second Lucas 4 way box protruding from the left end of the instrument panel enclosure which looks almost intended.

I was hoping to leave the originals sockets in, oh heck does that make me a rivet counter 8-)

Greg

You can solder wires to brass splitpins and drill a small piece of plastic with same hole centres to hold the pins and cover with heatshrink, works for me.

Martin

They are NOT banana plugs, they are somewhat smaller - can't think of the correct name (having a senior moment) but essentially the correct plug is a chrome on brass split pin with a threaded brass slider, and an insulator that keeps everything in place. Should not be too hard to make one up ...

Senior moment over. It's a wander plug.

And available here:

Thanks Martin, that's a good fall back if Karen's source can't deliver. Greg

If you're carefull you can drill the imperial ones out to take 4mm plugs, it's not a lot, but it is a blind brass hole, so a pillar drill is reccomended.

On my IIa I used a twin post like this

Oh, and mine is fused, as I built a custom wiring loom myself for it, with things properly fused. Currently has 8 fuses used out of a 10-way block of blade fuses. No, I'm not a rivet counter and the blade fuses are easier to get hold of....

Alex

Thanks Alex, I'm looking at alternatives, another one is a different arrangement of sockets in the accessory switch panel over the auxiliary instruments. I'm up to 8 fuses too, much better in my book to blow a fuse than set the old girl on fire 8-) Greg

Roberto

"Greg" ha scritto nel messaggio news: snipped-for-privacy@pipex.net...

Funnily enough, my new wiring loom nearly did catch fire about 3 months after i fitted it. But that was down to a p-clip coming adrift and the loom dropping behind the accellerator linkage, which chafed its way through the main feed and the dynamo field wire from the regulator.

Alex