Conductivity Sensor??

Mar 30, 2005 5 Replies

Having Just had to rebuild my Disco 300Tdi for the second time in 6months due to loss of water, I am now rather keen to find a conductivity sensor that can be fitted to the header tank and provide a warning when the level drops.



Of course I am not keen to do anything to mess with the integrity of the header tank and so this would rule out drilling holes and sticking probes in. I would like a replacement header tank cap that has probes installed.



Anyone got any ideas?



Regards Stephen


On or around Wed, 30 Mar 2005 08:01:45 +0200, "fanie" enlightened us thusly:

did you find out where the sodding stuff goes?

on ours, it had a new head (and gasket, natch) after it was cooked, and since then has had a new water pump (which was shagged) and a new P gasket recently, and it *still* loses a small amount of water.

If you want to hack something together, look for "Qprox" sensors - they work on capacitance, and you can put a sensor on the outside of a plastic tank and see the water level inside.

Steve

Wont a cap from a classic RR fit? It has a float switch built in. When ours broke I bought a Vauxhall Carlton one which was exactly the same (Bosch I think). So you should be able to get one from a scrapyard easily enough Richard

On or around Wed, 30 Mar 2005 09:24:09 GMT, "Richard" enlightened us thusly:

ooer. Mind, mine would be forever putting the light on...

I was loosing about a cup of water a week, but when it (the head gasket) went, I had nothing left. It was fairly gushing out. As I am South Africa, I am not too sure about the vauxhall watsit (Vauxhall it sold as Opel in this market) but I am also not keen on messing with the pressure rating of the cap unless I am sure it is correct.

I have heard of various widgets that monitor engine oil pressure and water temp and start buzzing if it gets too loud but I have not come across any details as yet.

I can use my national instruments Fieldpoint to do all that, but at a few UKP (about ZAR30 000.00) it seems overkill.

Regards Stephen

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required