I am looking at upgrading the braking system on my 02 plate Range Rover. I would like to fit the 4 pot Brembo Calipers which are fitted to the later
06-07 vehicles. Just wanted to know if anyone has done this conversion and whether there is anything else they needed to modify?Regards
Brian
Brian,
You will need *at least* 19" rims to clear the Brembo's. There are pictures on my site -
-- Neil
Hopefully I should have enough room to fit them in then as I am running
22"s, And I have been informed today that the later Brembo Calipers that are fitted to the sport and Supercharged models are a direct bolt on replacement.Regards
Brian
On or around Wed, 10 Oct 2007 02:36:06 GMT, "Brian Tonks" enlightened us thusly:
and make sure you notify the insurers...
even if it's a standard RR part. I was looking at this for upgrading the
110 brakes to vented discs, and someone mentioned that someone else had fallen foul of doing this mod to a disco and the insurance wouldn't pay up, 'cos it was modified.You might want an engineer's report too that the uprated brakes are safe.
Lucky with that one I have a traders policy which covers me for all sorts of things... As they are fully aware of the type of work we do here they cover all modifications (stated or not)
"Austin Shackles" wrote in message news: snipped-for-privacy@4ax.com...
MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.