Hi,
Mazda MX6, 2.5 V6, L 1993 is not firing.
There is no spark at the plug.
As per advice in this group by PeteM I have tried to get a diagnostic code from it but there are no codes, even if I try to force a code by unplugging stuff.
I have changed the distributor but this has made no difference, that said mine had KL01 and a large A on it, the replacement has KF34 and a C.
Any input appreciated.
Which method are you using to try to get the codes? As a total lack of codes suggests a problem reading them or it is all due to a mechanical fault.
I am in the diagnostic plug, shorting across TEN and GND, I have a lamp across FEN and B+ but get nothing when I switch the ignition on.
Your connections are right according to Autodata but:
Have you tried a voltmeter instead of a lamp? It is recommended to use an LED or an analogue voltmeter, just count the needle swings. If you are using a bulb it may have too high a current requirement (just a possibility)
possibility)
Interesting, i'll give it a try.
I did get a led but managed to buy a flashing one, which defeated the object.
Have something to add? Share your thoughts — no account required.
Ask the community — no account required