Peugeot 106 K reg (1993)
Having problems with the clutch. Doesn't seem to fully dis-engage. Can this be solved by just adjusting the clutch cable (seems quite slack), or do I need to get more involved?
The spring on the pedal seems to return properly - is there another in the clutch itself that may have gone??
Any comments would be very helpful.
It's the first port of call.
============================ From a previous reply:
Early models have an adjusting nut on the transmission end of the cable. Look under and behind the battery as it's a bit difficult to see. If you find the adjuster slacken the locknut and then adjust so that you get 140mm of travel at the pedal.
Later models are self adjusting but they can stretch so you might need to replace with a new cable.
Cic.
Have something to add? Share your thoughts — no account required.
Ask the community — no account required